Satanic Fall Hoodie

This comfy black hoodie is perfect to wear for the fall season. The hoodie has cnmuerte's satanic fall 2021 design in htv metallic vinyl & glow in the dark htv. YAS! It glows in the dark. 👻

This is a hand-pressed product so each sweatshirt will not be the same. Each hoodie is unique and different like you!👻✨

Hanes P180 Ecosmart Full-Zip Hooded Sweatshirt

Features:

• 7.8 oz., 50/50 cotton/polyester
• Low pill performance
• Bar-tacked dyed-to-match drawstring
• Split pouch pocket
• Coverstitched armholes and waistband
• Rib waistband and cuffs

Material:  50/50 cotton/polyester

Production Time: 8 days

Shipping: 1-3 days 

*Made to order

Washing Instructions:

1. Do not dry clean. HTV should never be dry cleaned. The harsh temperature and chemicals that are used during dry clean just do not mix well with HTV. 
   
   
2. Wash and dry garments inside out. By turning the shirts, pillowcases, etc inside out, you’re giving the vinyl a layer of protection during the wash. While washing and drying clothes, they’re rubbing up against each other and that abrasion during washing can cause your vinyl to peel prematurely.
   
   
3. Choose cold temperature settings for the wash. When washing shirts that have htv on them, you don’t want your water temperature to exceed 178 degrees Fahrenheit. High temperatures can weaken the adhesive on the vinyl which can cause the vinyl to peel or crack.
   
   
4. Use mild detergent. Detergents that are “green” can be too harsh for the adhesive on htv. You should also avoid bleach and fabric softeners in order to make the vinyl last as long as possible.
   
   
5. Dry on a low/tumble setting or hang dry. Just like when washing, you won’t want to dry your htv shirts on high heat. If you stick with tumble dry or low heat, you should be good to go. If possible, you can hang dry your htv garments for best results. Hang drying will minimize any wrinkles you see in htv after washing.
   
   
6. Do not iron directly on a heat transfer design. The high heat on the vinyl will melt the vinyl and or burn the adhesive. Regardless, ironing directly on vinyl is a great way to ruin a shirt. If you must iron the shirt, make sure to use low heat and place a dish towel or cloth over the transfer.